Burris Eliminator 3.5-10x40 Laser Rangefinder Scope
Availability: Out of stock
No more guessing yardage or fumbling with a handheld device. No more losing sight of your trophy. No more guessing holdover. The Eliminator, your hunting partner, knows exactly how far away your trophy stands and exactly what your cartridge will do. With The Eliminator, just Range, Aim, and Fire.
With an expanded range of ballistic charts, the Eliminator significantly extends the range and accuracy of centerfire and rimfire rifles, muzzleloaders and slug guns. Now, nothing is safe from the Eliminator. Big game, small game, varmints…even tin cans.
A few clicks in the set-up mode is all it takes to enter or change the drop number to perfectly match your specific cartridge’s ballistic performance.
Sophisticated Technology Made Simple, Simple, Simple.
Simply enter one of the 123 drop numbers into the Eliminator. In a split second, the Eliminator factors in the distance, the angle of the shot, and the ballistics of your cartridge or load, and presents a lighted dot for the perfect holdover.
Ballistics Tables Made Simple
All you need to know is the drop in inches at 200 yards when sighted-in at 50 yards, or the drop in inches at 500 yards when your cartridge is sighted-in for 100 or 200 yards. Burris provides this ‘drop number’ for more than 1,900 commercial cartridges. With your drop number established, you decide if you need or prefer to sight-in at 50, 100 or 200 yards.
Programming Made Simple
1. First, push the Main Button (left side of scope) to turn on the electronics. Then push the Main Button once more to get three dashes (— — —) in the range area.
2. Next, push the Forward Arrow button (right side of scope) then the Main Button. Hold simultaneously for 6 seconds to enter Set-Up Mode.
3. Select either (Y)ards or (M)eters, press the forward button.
4. Select a (0) 50 yard sight-in, (1) 100 yard sight-in distance or (2) 200 yard sight-in distance, then press the forward button.
5. Select the two-digit Drop Number (04 thru 90) and press the back button. You’re done!
Precision Made Simple
Sight-in your gun at your selected sight-in distance of either 50, 100 or 200 yards. Then verify point of impact by actual shooting at 200 or 500 yards. Depending on the exact ammo performance, your gun’s barrel length, the elevation, and any extreme temperatures, you might need to increase or decrease your Drop Number by a couple of digits for exacting performance.
Life Made Simple
Your programming is stored in the scope no matter the condition of your battery and it will still remember your programming with no battery at all.
The Hunt Made More Enjoyable and Successful
The Burris Eliminator LaserScope is in a league of its own. No other riflescope combines this level of quality, technology, accuracy, simplicity, repeatability and effectiveness. It will greatly increase the distance at which you can be confident in making an ethical shot. You do the hunting and shooting, the Eliminator will do the memorizing and calculating.
The Eliminator features a balanced design and integrated mounting system that mounts low on any firearm. Touch the remote activation switch and within a split second the range to the target and holdover is displayed on the scope’s reticle. Then, place the red dot where you want to place your shot and pull out your tag.
Strong, Low Mounting
The unique mounting system allows the lowest possible mounting of the LaserScope to the rifle.
Laser Range* (yards reflective)
Laser Range* (yards deer)
Field of View
(Low-High feet @ 100 yards)
Adjustable Parallax (yards)
Exit Pupil (mm) Low - High
Click Value (Inch @ 100 yards)
Weight with mount & battery
Optimum Eye Relief (Inch)
Objective End Dia (mm)
Clear Objective Dia (mm)
Ocular End Dia (mm)
Overall Length (Inch)
Mounting Rail Length (Inch)
Torque Spec. for Mounting Bolts
*Environmental conditions may limit range
+/- 1 yard
-15° - +122°F
3.0 - 3.5
|Accessory Rail||Not Applicable|