CZ P-10 Optic Plate Adapter Kit 2 DPP Shield
Availability: Out of stock
KIT 2 WILL FIT:
- SHIELD RMS
- SHIELD SMS
- J POINT
KIT INCLUDES 2 M3 OPTIC PLATE ADAPTER SCREWS
Verify that your pistol is unloaded before attempting any of the following steps.
Plate to Slide
- Remove the two screws from the cover plate on the slide using a T10 driver and remove the cover plate.
- Place the adapter plate onto the slide and secure using the two supplied M3x8 screws, torquing to 12-15 INCH lb. Medium strength threadlocker is recommended.
Sight to Plate
- Place the optic onto the plate and follow the manufacturer’s mounting specifications.
* With optic installed, screw protrusion beneath the plate should not exceed 2.3mm (.090”) or damage will occur.
|Accessory Rail||Not Applicable|
|Warranty||Warranty provided by product manufacturer.|