CZ P-10 Optic Plate Adapter Co-Witness Kit 1
Availability: In stock
- SF KINGSLAYER
KIT INCLUDES 2 OPTIC PLATE ADAPTER SCREWS, 2 6-32 OPTIC SCREWS
ALSO INCLUDES CO WITNESS SIGHT SET WITH WHITE DOTS
Verify that your pistol is unloaded before attempting any of the following steps.
Plate to Slide
- Remove the two screws from the cover plate on the slide using a T10 driver and remove the cover plate.
- Place the adapter plate onto the slide and secure using the two supplied M3x8 screws, torquing to 12-15 INCH lb. Medium strength threadlocker is recommended.
Sight to Plate
- Place the optic onto the plate and secure using the two supplied 6-32x1/2 screws, torquing to 12-15 INCH lb. Medium strength threadlocker is recommend.
* With optic installed, screw protrusion beneath the plate should not exceed 2.3mm (.090”) or damage will occur.
- Remove front sight set screw using a 1.5mm hex key, drive the sight out towards the muzzle.
- Remove rear sight set screw using a 2mm hex key, drive sight right to left.
- Install in reverse of operations 1 and 2.
|Accessory Rail||Not Applicable|
|Warranty||Warranty provided by product manufacturer.|