Premium bore solvent - Spec1 premium bore solvent will dissolve the most tenacious carbon and lead on contact. For barrel cleaning, push a wet patch or mop through the barrel and allow to soak for 2 to 5 min. Repeat if necessary. A light brushing may be required. Wipe or rinse clean. Follow with some Spec1 premium blend lubricant on a patch or mop to displace any moisture. For larger parts submerse completely in solution. Allow parts to soak for 5 to 15 min. This process will vary with frequency of cleaning. Remove and wipe, brush, or rinse clean with hot water. Spec1 premium bore solvent can be used on all firearms. Premium firearm cleaner - Spec1 premium firearm cleaner is an all-purpose cleaner. Spray anywhere cleaning is needed. Allow to sit for a few minutes and then wipe or rinse. A light brushing may be required. Cleans carbon powder fouling, grease, oil, cosmoline, and will also neutralize corrosive ammo. Safe on most plastic, wood, and painted surfaces. Spec1 premium firearm cleaner can be used on all firearms. Premium blend lubricant - Spec1 premium blend lubricant contains a proprietary anti-wear agent that reduces friction and wear by 95 to 98%. Falex tested at 4500 psi. Penetrates existing lubricants. Will not harden, become sticky, or tacky. Works in extreme temperatures (-110 to 1250 degree F), and it will not attract dust, dirt or sand. Spec1 premium blend lubricant can be used on all firearms. Non-toxic/non-hazardous - Spec1 products in this combo pack are safer to handle and safer to use while operating your firearm.
|Accessory Rail||Not Applicable|
|Warranty||Warranty provided by product manufacturer.|