This kit consists of everything you need to convert your standard P365 to manual safety.
OEM Parts List Includes:
NOTE: These grips often come with minor surface lines or marks from the factory. As these are not damaged in our store, we are unable to return or replace surface damaged grips.
If you have an issue after installation where the safety lever will not rotate, it may be that the detent pin needs to be rotated 90 degrees (inside the channel it sits in on the lever). The tip of the detent pin has a contour where it has flats and the flat sides need to ride against the contour of the frame. If it is turned 90 degrees opposite, the sharper end will prevent proper rotation of the safety lever. We will attempt to post some photos in the near future to better illustrate this.
|Accessory Rail||Not Applicable|
|Warranty||Warranty provided by product manufacturer.|
No - you do not and should not file the detent pin or manual safety lever. If they are not fitting correctly, don't modify the parts. Reach out to us or Sig directly.